Tower Crane TC6015A
Download Tower Crane ( TC6015 ) Data sheet : 
This is our principal product, with a high quality craft no matter on design or structure and at a reasonable price. It widely applied both in domestic and abroad projects. Moderate loading capacity, easy handle, slewing swiftly and perfect work performance in construction. All to make the work going smoothly.
Performance and technical index
Free standing height: 45m (stationary type)
Free standing height: 50m (under carriage)
Full jib length: 60m
Max load: 8ton
Tip load: 1.5
Lifting speed m / min: 2 fall 0-40 0-80, 4 fall 0-20 0-40
Slewing speed r / min: 0~0.6
Trolleying speed m / min: 56/28/6
Climbing speed m/min: 0.56
Necessary electric power : 52KVA
Working temperature centigrade: -20°C~ 40°C
Tower Crane TC6015A Introduction
Tower Crane TC6015A Self-climbing tower crane is a latest developed tower crane based on national standard JG/T 5037-1993 “Classification of tower crane”, and has integrated with the advantages of tower crane construction design both in domestic and abroad.
This tower crane adopt horizontal jib, trolley radius changing, upper slewing, and fluid pressure climbing, It has various installation mode such as fixed, attached, and traveling type. In the light of job location condition, through various combinations of jib section and tension rod, formed 60m, 54m, 48m, 42m, 36m five sort of jib length, The Max. length of the hoisting jib is 60m, the Max. payload capacity is 10t, Max. hoisting moment is 1280 kN•m (128 t•m). This crane has bigger operation space, free hoisting height reached 45m.
The hoisting mechanism applies dual-speed wound-rotor motor. Maximum hoisting speed is 80m/min, lowest speed less than 4.5m/min, It can also according to request of consumer adopt the
frequency speed controlled motor, at that case the hoisting speed may reached 92m/min, achieve low speed in heavy load, high speed in light load, and ideally empty-hook speed, and precision hoisting speed, greatly raise the working efficiency, the slewing mechanism adopt the eddy current speed regulator, DC braked torque motor, has bigger overload ability and good loaded starting performance, These ensure that the crane can start up and brake more stably and the operation is safer and more reliable.
By using the added standard section and hydraulic climbing system to raise the crane, the hoisting height of the crane rises with the building height rises, the hoisting performance keeps quite well at various heights. The cab be installed at upper part of crane, has a wide field of view, and operated comfortable and conveniently.
The safety and protection device of the crane is also complete and reliable, including hoisting moment limiter, hoisting load limiter, slewing limiter, radius-changing limiter, height limiter, These ensure the crane runs more safety and reliable.
TC6015 self-climbing tower crane is designed with advanced parameters, reliable performance, nice appearance, reasonable construction and high quality. It has outstanding advantages of simple and practical, reasonable price. It can perfectly meet the construction requirements of the high buildings and industrial buildings.
